IK Multimedia iRig Pro I/O User Manual

English
9
iRig Pro I/O LEDs
Status / Audio level LED
The lower LED will show the audio signal level and the status of the unit as follow:
• LED Off: iRig Pro I/O is not connected to any power source.
• LED Bright blue: iRig Pro I/O is connected and a signal is present at the input of the channel.
• LED Green: The input signal of the corresponding channel is low.
• LED Orange: The input signal of the corresponding channel is OK.
• LED Red: The input signal of the corresponding channel is too high.
Status / Audio level LED
The upper LED show the phantom power and MIDI status.
Phantom LED
• Off: phantom power is OFF.
• Steady Red: phantom power is ON
MIDI LED
• Off: iRig Pro I/O is not receiving any MIDI messages.
• Blinking Green: iRig Pro I/O is transmitting MIDI messages.
• Blinking Blue: iRig Pro I/O is receiving MIDI messages.
LOW BATTERY
Whenthebatterylevelapproachtobelow,allthe(turnedON)LEDswillfastblinkevery“2”sec.Whenthe
battery is at a very low level the audio out is muted and the LED continuously blinks.

IK Multimedia iRig Pro I/O Specifications

General

Connector 1	MIDI