14
MS1/2 122004
You have purchased an original IKA laboratory machine which
meets the highest engineering and quality standards.
In accordance with IKA warranty conditions, the warranty period is
24 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our works,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and
maintenance contrary to the instructions in this operating manual.
If you require servicing, return the appliance in its original packa-
ging. Storage packaging is not sufficient. Please also use suitable
transport packaging.
Design voltage: VAC 230±10%
oder VAC 115±
10%
Design frequency: Hz 50/ 60
Input power: W 31
Output power W 10
Shaking rate: rpm 0 - 2500 (infinitely
adjustable from 200)
Speed adjustment:
analog (infinitely)
Power supply acc. to IEC 60320:
cold device plug
with fuses
Fuses: mA 2 x 400T (230V)
Ident-Nr. L001060
(in cold device plug) 2 x 630T (115V)
Ident-Nr. 2008600
Mains cable: with ground wire and in
compliance with country
spezification
Shaking rate display: Scale 0 - 2500
Drive: Speed controlled DC-
motor, with ball bearings
Protection at overloaded: Temperature sensor in
motor winding
Agitation stroke: mm 4.5
Shaking motion: circular
Perm. duration of operation: % 100
Perm. ambient temperature: °C +5 bis +40
Perm. relative humidity: % 80
Protection type acc. to DIN EN 60 529:
IP 21
Protection class: I
Overvoltage category: II
Contamination level: 2
Operation at a terrestrial attitude:
m max. 2000
Max. supported load incl. attachment:
kg 0,5
Dimernsions: (W x D x H) mm 115 x 225 x 60
Weight without supported load: kg 3.5
Technical data
Warranty
3453900_BA MS1_MS2_122004 11.04.2005 9:29 Uhr Seite 14
To Next Page
Loading...
