Need help?Do you have a question about the IKA NANOSTAR 7.5 digital and is the answer not in the manual?
General| Model | NANOSTAR 7.5 digital |
|---|---|
| Type | Overhead Stirrer |
| Speed Range | 0/30 - 2000 rpm |
| Torque max. at stirring shaft | 7.5 Ncm |
| Speed control | Electronic |
| Setting accuracy speed | 1 rpm |
| Display speed | LED |
| Chuck range diameter | 0.5 - 10 mm |
| Hollow shaft, push-through even. when stopped | Yes |
| Extension arm diameter | 13 mm |
| Extension arm length | 160 mm |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 42 |
| Voltage | 100 - 240 V |
| Frequency | 50/60 Hz |
| Power Input | 30 W |
| Power Consumption | 30 W |
| Display | LED |
| Weight | 1.1 kg |
| Motor rating input | 30 W |
| Output max. at stirring shaft | 7.5 Ncm |
| Permissible ON time | 100 % |
| Fastening on stand | Extension arm |
| Material | Aluminum casting / thermoplastic polymer |
Speed is monitored and regulated by processor; guarantees constant speed even with viscosity changes.
Stirrer can run at 130% rated power briefly; speed reduces to maintain torque within rated limits.
Procedure for powering on the IKA NANOSTAR 7.5 digital stirrer.
To Next Page
