Need help?Do you have a question about the IKA LR 1000 basic and is the answer not in the manual?
General| Stirring quantity max. (H2O) | 100 l |
|---|---|
| Hollow shaft, internal diameter | 8 mm |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Protection Class | IP 42 |
| Frequency | 50/60 Hz |
| Voltage | 100 to 240 V |
| Material | Plastic |
Explains the meaning of warning symbols used in the manual.
Provides essential safety guidelines for operating the equipment.
Lists specific hazards associated with flammable materials and equipment operation.
Describes the intended applications and operating environments for the IKA LR 1000 system.
Specifies areas where the equipment should not be used.
Instructions for unpacking and lists all components included in the delivery.
Details the main components of the LR 1000 basic/control base.
Details the components of the LR 1000.1 reactor vessel.
Details the components of the LR 1000.3 reactor vessel.
Instructions for screwing the support rod onto the base.
Guides on how to securely attach the reactor vessel to the base.
Steps for installing and connecting the Pt 100 temperature sensor.
Explains how to connect an external cooler to the device.
Details how to adjust and set the safety temperature limit.
Explains each component of the LR 1000 basic operator panel and its function.
Explains each component of the LR 1000 control operator panel and its function.
Checks for voltage compatibility and socket requirements before operation.
Describes the three available operating modes (A, B, C) and how to change them.
How to start, stop, and adjust the heating function.
Explains how the counter operates and displays time durations.
Explains how to adjust and use the timer function for heating.
How to start, stop, and adjust the stirring speed.
Explains the meaning of various symbols used on the device interface.
Guides on how to navigate through menus and sub-menus using the controls.
Outlines the structure of menus for Stirring, Heating, Weighing, Timer, etc.
Lists default factory settings for various parameters.
Explains how to measure relative changes in viscosity.
Describes "Accurate" and "Fast" control modes for heating.
Steps for calibrating the weighing function.
Details on setting operating modes (A, B, C) and display options.
Covers safety confirmations, password protection, languages, and factory resets.
How to connect and use the USB interface for communication.
Details on configuring and using the RS 232 interface.
Lists available commands for controlling the instrument remotely.
Explains the watchdog function for monitoring serial data flow.
Describes Watchdog Mode 2 behavior and PC 2 warning.
Details the RS 232 and USB cables required for PC connection.
Step-by-step guide to disassemble the reactor vessel.
Steps to remove and clean the anchor stirrer.
Lists approved cleaning agents and precautions for cleaning the instrument.
Information on how to order spare parts and arrange for repairs.
Lists error codes, their descriptions, and the effect on the instrument.
Provides step-by-step solutions for common error codes.
Details the warranty period and conditions.
Lists various accessories available for the LR 1000 system.
Specifies the materials that come into contact with the processed medium.
Lists the technical specifications for the LR 1000 basic model.
Lists the technical specifications for the LR 1000 control model.
To Next Page
