IKA LR 1000 basic - Cleaning Agents and Spare Parts; Approved Cleaning Agents and Methods; Ordering Spare Parts and Repair

21
- Wear protective gloves during cleaning the instrument.
- Electrical devices may not be placed in the cleaning agent
for the purpose of cleaning.
- Do not allow moisture to get into the equipment when
cleaning.
- Please consult IKA
®
before using any cleaning or decon-
tamination methods, other than those recommended here.
- The handles cannot be place in the cleaning agent for
cleaning.
- The only cleaners or disinfectants that may be used are
those that:
- lie in the pH range 5 - 8,
- contain no corrosive alkalis, peroxides, chlorine compounds,
acids or brine.
- All product contacting components are suited for cleaning
in the laboratory dish washers.
Only clean IKA
®
appliances using these IKA
®
approved
cleaning agents.
Dirt Cleaning agent
Dyes Isopropanol
Building materials Water containing detergent, Isopropanol
Cosmetics Water containing detergent, Isopropanol
Food Water containing detergent
Fuels Water containing detergent
Other materials Please consult IKA
®
Spare parts order:
When ordering spare parts, please give:
- machine type
- serial number, see type plate
- item number and designation of the spare part see
www.ika.com, spare parts diagram and spare parts list.
Repair:
Please send equipment for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repairing, please request the “Decontamination Cer-
tificate” from IKA
®
, or download the printout of it from
the IKA
®
website www.ika.com.
If you require servicing, return the equipment in its original
packaging. Storage packaging is not sucient. Please also
use suitable transport packaging.
Fig. 25

Now you can remove the anchor stirrer as shown in Fig. 25.
All O-rings can now be carefully removed by hand or using a
blunt tool for cleaning too.