Need help?Do you have a question about the IKA RO 10 and is the answer not in the manual?
General| Stirring Capacity (H2O) | 10 L |
|---|---|
| Speed Display | Digital |
| Stirring bar length max. | 80 mm |
| Permissible relative humidity | 80 % |
| Protection class | IP 21 |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Permissible ambient temperature | 5 to 40 °C |
General hazard warnings regarding health, safety, appliance function, and proper use.
Warnings related to magnetism and hot surface endangerment.
Read instructions, wear PPE, ensure proper setup, and avoid hazardous environments.
Be aware of magnetism, risk of burns, safe media processing, and PTFE bar notes.
Ensure accessory safety, process pathogenic materials safely, and protect equipment.
Please unpack the device carefully. In case of damage, a detailed report must be sent immediately.
Lists items included in the delivery scope for RO and RT models.
For mixing and/or heating liquids in laboratories; not suitable for residential areas.
Observe ambient conditions and follow the device power-on sequence.
The maximum heating plate temperature is restricted to 130 °C by a safety limit.
Procedure to set the desired safety temperature using membrane keys.
How to start, stop, and adjust the stirring speed using buttons.
Reduces heat generation by lowering input coil power, offering speed-independent stirring power options.
Description of different operating modes (A, B, D) for parameter saving and device behavior.
How to activate reverse rotation, set duration, and its behavior after reversal.
How to start and stop the heating function and adjust temperature.
Disconnect plug before cleaning. Use approved agents and wear gloves.
Table listing error codes, causes, effects, and solutions for RT models.
Details on the stirring bar dimensions and the stirring bar remover tool.
Technical specifications for RO models including power, voltage, dimensions, and weight.
Technical specifications for RT models including power, voltage, dimensions, and weight.
Common specifications for RO/RT models like setting resolution, ambient conditions, and protection class.
Information on maximum stirred quantity and compatible vessel types.
To Next Page
