To Next PageTo Next Page
Need help?Do you have a question about the IKA HB 10 basic and is the answer not in the manual?
Instructions for user safety and proper use of the appliance.
How to carefully unpack the device.
Lists the included items for each model.
Details the primary use of the appliance.
Lists typical environments where the appliance is used.
Description of controls and indicators for HB 10 basic.
Description of controls and indicators for HB 10 digital/control.
Description of Mode A, including factory settings.
Description of Mode B, including adjustable settings.
Description of Mode C, including inherited settings.
Procedure to switch between modes A, B, and C.
Procedure to adjust the safety temperature limit.
Annual procedure to verify the safety circuit's functionality.
How data is transmitted via the IR interface.
Operating the device via external software.
How to clean the device safely.
Information required for ordering spare parts.
Instructions for sending the device for repair.
Safety guidelines and precautions for operating the appliance.
How to carefully unpack the device.
Lists items included with each model variant.
Details the primary use of the appliance.
Lists typical environments where the appliance is used.
Description of controls and indicators for HB 10 basic.
How to set the target temperature using the rotary knob.
How to set the safety circuit for different media.
Identifies controls and display elements for the digital model.
How to set the desired temperature on the digital model.
Procedure to reset the safety circuit adjustment knob.
Details of operating mode A and its settings.
Details of operating mode B and its settings.
Details of operating mode C and its settings.
Procedure to select and change operating modes.
Step-by-step guide to setting the safety temperature limit.
Annual procedure to test the safety circuit's functionality.
How to clean the device safely.
Information required for ordering spare parts.
Instructions for sending the device for repair.
General| Speed Range | 100 - 1500 rpm |
|---|---|
| Permissible Ambient Temperature | 5 - 40 °C |
| Permissible Relative Humidity | 80 % |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Protection Class according to DIN EN 60529 | IP 21 |
| Max. Stirring Speed | 1500 rpm |
