16
Note: a pH calibration can only be carried out with an in-
serted temperature sensor.
Reset pH probe:
Reset the pH measuring reference.
Display:
Display the measured pH value on working screen.
Operating Mode:
Mode A:
After power on/power failure no automatic restart of func-
tions.
Mode B:
After power on/power failure automatic restart of func-
tions, depending on previous settings.
Mode C:
Set values (set in A or B) cannot be changed.
After power on/power failure automatic restart of functions,
depending on previous settings.
Display:
Here the user can specify which information (torque trend,
pH value, or timer value) is to be displayed on the working
screen.
Safety:
Time Out:
Here you can set a time out. This time out goes into effect
if the communication between the device and the PC has
failed. In this case, the device continues to run with the
set speed and temperature.
Password:
In the menu, the user can protect the device settings using
a password. The user is requested to input the password in
order to access the working screen (factory setting: 000).
Safe temperature confirmation:
Here you must confirm the safety temperature value of the
heating block.
Settings:
Languages:
Here allows the user to select the desired language by turn-
ing and pressing the rotary/push knob (A). A tick indicates
the language that is set for the system.
Display:
Here allows the user to change the background color of the
working screen.
Sound:
Here allows the user to activate/deactivate the key-press
sound and to set the volume.
Factory settings:
Here the user can reset the device to factory settings. The
system requests confirmation to recreate the factory settings.
Pressing the ”OK” button resets all the system settings to the
original standard values set at dispatch from the factory.
Information:
The ”Information” option offers the user an overview of
the most important system settings of the device.
To Next Page
Loading...
