To Next Page
P
Paige HillSep 9, 2025
Why is the inside of my IKEA 904.756.16 wet?
- Ppamela37Sep 9, 2025
If you find the interior of your IKEA Dishwasher is wet, this is normal. Humid air condenses on the appliance walls.
Why is the inside of my IKEA 904.756.16 wet?
If you find the interior of your IKEA Dishwasher is wet, this is normal. Humid air condenses on the appliance walls.
How to prevent stains on dishes from IKEA Dishwasher?
If there are stains and dry water drops on glasses and dishes washed in your IKEA Dishwasher, the released quantity of rinse aid may not be sufficient. Try adjusting the rinse aid level to a higher setting. The quality of the rinse aid could also be a factor.
How to remove streaks from IKEA 904.756.16?
If you observe whitish streaks or bluish layers on glasses and dishes from your IKEA Dishwasher, the released quantity of rinse aid is likely too high. Adjust the rinse aid level to a lower setting. Also, the quantity of detergent could be too high.
What to do if my IKEA Dishwasher doesn't drain and shows i20?
If your IKEA Dishwasher isn't draining water and the display shows i20, check these items: * Ensure the sink spigot is not clogged. * Verify that the interior filter system is not clogged. * Confirm the drain hose has no kinks or bends.
What to do if IKEA 904.756.16 Dishwasher shows i51 - i59 or i5A - i5F?
If your IKEA Dishwasher has a malfunction of the wash pump or the drain pump and the display shows i51 - i59 or i5A - i5F, try switching the appliance off and on.
How to improve drying results in IKEA 904.756.16 Dishwasher?
If you're experiencing poor drying results with your IKEA Dishwasher, consider these points: * If tableware has been left inside the closed appliance for too long, activate AutoOpen to automatically open the door and improve drying. * Check if the rinse aid dispenser needs filling or if the dosage is insufficient, and adjust accordingly. * The quality of the rinse aid could be the issue. * It is recommended to always use rinse aid, even with multi-tablets. * Remember that plastic items may require towel drying. * Also, verify that the programme selected includes a drying phase.
What to do if IKEA Dishwasher shows i41 - i44?
If your IKEA Dishwasher has a malfunction of the water level detection sensor and the display shows i41 - i44, ensure that the filters are clean and try switching the appliance off and on.
What to do if IKEA 904.756.16 shows iF1?
If the water level inside the IKEA Dishwasher is too high and the display shows iF1, try switching the appliance off and on. Also, make sure the filters are clean and the outlet hose is installed at the correct height above the floor, referring to the installation instructions.
What to do if IKEA 904.756.16 Dishwasher shows i61 or i69?
If the temperature of the water inside the IKEA Dishwasher is too high, or if there is a malfunction of the temperature sensor and the display shows i61 or i69, make sure that the inlet water temperature does not exceed 60°C. You can also try switching the appliance off and on.
How to remove limescale from IKEA Dishwasher?
If you see limescale deposits on the tableware, tub, or inside the door of your IKEA Dishwasher, check if the salt level is low and refill if necessary. Ensure the salt container cap is tight. If your tap water is hard, refer to 'The water softener' section. Use salt and set water softener regeneration even with multi-functional tablets. You can also start the Machine Care programme with a descaler designed for dishwashers. If deposits remain, use suitable appliance cleaners or try a different detergent, or contact the detergent manufacturer.
General| Category | Dishwasher |
|---|---|
| Type | Built-in |
| Number of place settings | 13 |
| Programs | 6 |
| Depth | 55.0 cm |
Covers general safety, child protection, installation, electrical, water, and usage precautions.
Information on contacting service and proper disposal of the appliance.
Details the appliance's components and the Beam-on-Floor indicator feature.
Explains buttons, display symbols, and indicators for operating the appliance.
Details available wash programmes, their phases, and customizable options.
Guides on configuring basic settings, water softener, and entering setting mode.
Instructions on loading, using detergent, starting programmes, and managing cycles.
Provides tips for optimal cleaning, energy saving, and correct use of consumables.
Instructions for cleaning the appliance interior, exterior, filters, and spray arms.
Detailed steps for cleaning filters, inlet hose filter, and spray arms.
Addresses common problems, alarm codes, and their solutions for appliance malfunctions.
Solutions for poor washing results, drying issues, streaks, and stains on dishes.
Details technical data like dimensions, voltage, frequency, and water supply requirements.
Explains the guarantee period, coverage, exclusions, and how to obtain service.
