IKEA DATID OV7 User Manual

ENGLISH 9
thermostat indicator light switches on.
5. At the end of cooking, turn the knobs
to OFF (0) and turn the button (B)
anticlockwise (without pressing), until the
symbol
is displayed in the window”
because in manual mode the oven will
NOT switch off automatically.
Manualcookingwithcookingstarttime
1. Turn the button (B) anticlockwise
(without pressing), until the symbol
is
displayed in the window
2. Press the button (A) and turn it
anticlockwise until the triangle (D) u
points to the time at which cooking is to
start (e.g. in gure: 10.08).
3. Turn the selector knob to the required
symbol.
4. Turn the thermostat knob clockwise to
the required temperature.
5. At the end of cooking, turn the knobs
to OFF (0) and turn the button (B)
anticlockwise (without pressing), until the
symbol
is displayed in the window”
because in manual mode the oven will
NOT switch off automatically.
Programmedcookingorpyro-cleanwith
programmedstarttimeanddurationof
cooking/pyro-clean
1. Turn the button (B) anticlockwise (without
pressing) until the window (C) displays
the duration of cooking/pyro-clean
(5 - 180 min.), for the duration of the
pyro-clean function see directions on the
product sheet.
2. Press the button (A) and turn it
anticlockwise until the triangle (D) u
points to the time at which cooking/pyro-
clean is to start (e.g. in gure: 10.08).
3. Turn the selector knob to the required
symbol.
4. Turn the thermostat knob clockwise to
the required temperature; this is not
necessary for the Pyro-clean function.
5. At the end of the set cooking/pyro-clean
time, an acoustic signal will sound and
the oven will switch off automatically.
To exclude the acoustic signal, turn
the button (B) anticlockwise (without
pressing) until the symbol
is displayed
in the window.
6. At the end of the set cooking time,
cooking may be prolonged by following
the instructions given above, or by using
the manual cooking procedure (not
possible for the Pyro-clean function).
Programmedcookingorpyro-cleanwith
programmeddurationofcookingtime/
pyro-clean
1. Turn the button (B) anticlockwise (without
pressing) until the window (C) displays
the duration of cooking time/Pyro-clean
(5 - 180 min.); for the duration of the
pyro-clean function see directions on the
product sheet.
2. Press the button (A) and turn it
anticlockwise until the triangle (D) u
points to the time shown on the clock
(hour hand). The button clicks when
turned to the proper position.
3. Turn the selector knob to the required
symbol. The oven light switches on
(unless you have selected the Pyro-clean
function)
4. Turn the thermostat knob clockwise
to the required temperature. The red
thermostat indicator light switches on;
this is not necessary for the Pyro-clean
function.
5. At the end of the set cooking/pyro-clean
time, an acoustic signal will sound and
the oven will switch off automatically.
To exclude the acoustic signal, turn
the button (B) anticlockwise (without
pressing) until the symbol
is displayed
in the window.
6. At the end of the set cooking time,
cooking may be prolonged by following
the instructions given above, or by using
the manual cooking procedure (not
possible for the Pyro-clean function).

IKEA DATID OV7 Specifications

General

Brand	IKEA
Model	DATID OV7
Category	Oven
Language	English