What to do if my IKEA ENASTAENDE leaves dishes wet?
If your IKEA Dishwasher leaves the dishes wet after a cycle, it might be because the selected program doesn't include a drying phase or uses a low-temperature drying phase. Check if the rinse aid dispenser is empty and refill it if needed. The quality of the rinse aid or multi-tablets could also be the cause; try using a different brand or use rinse aid and multi-tablets together.
What to do if the anti-flood device is on in IKEA ENASTAENDE Dishwasher?
If the anti-flood device is activated on your IKEA Dishwasher, close the water tap and contact an Authorised Service Centre.
What to do if my IKEA Dishwasher won't fill with water?
If your IKEA Dishwasher isn't filling with water, make sure the water tap is completely open and that the water supply pressure isn't too low. Contact your local water authority to check the water pressure. Also, ensure the water tap and the filter in the inlet hose aren't clogged. Clean the filter if necessary. Finally, check the inlet hose for any kinks or bends.
What causes streaks on glasses from IKEA ENASTAENDE?
Whitish streaks or bluish layers on glasses and dishes from your IKEA Dishwasher are often due to the released quantity of rinse aid being too much. Adjust the rinse aid selector to a lower position. Also, it could be that the quantity of detergent is too much.
How to remove stains on dishes from IKEA ENASTAENDE?
If you're seeing stains and dry water drops on your glasses and dishes after using your IKEA Dishwasher, it could be that the released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. The quality of the detergent can also be the cause.
What to do for stains on dishes in IKEA ENASTAENDE Dishwasher?
If you're seeing stains and dry water drops on glasses and dishes from your IKEA Dishwasher, the released quantity of rinse aid may not be sufficient. Adjust the rinse aid selector to a higher position. Also, the quality of the detergent can be the cause.
Why are the dishes still wet after the IKEA ENASTAENDE Dishwasher finishes?
If the dishes in your IKEA Dishwasher are wet after a cycle, consider the following potential causes: * The programme may be without a drying phase or with a low temperature drying phase. * The rinse aid dispenser might be empty. * The quality of the rinse aid could be a factor. * The quality of the combi detergent tablets may be the cause. In this case, try a different brand or activate the rinse aid dispenser and use rinse aid together with the combi detergent tablets.
Why is the salt indicator still on in my IKEA Dishwasher?
The salt indicator in your IKEA Dishwasher might remain on after refilling the salt container if you're using salt that dissolves slowly. If the indicator persists after 3 or 4 cycles, contact customer service. Note that this does not negatively affect the dishwasher's performance.
How to fix stains and water drops on dishes in IKEA Dishwasher?
If your IKEA Dishwasher leaves stains and dry water drops on your glasses and dishes, the rinse aid quantity might be insufficient. Try adjusting the rinse aid selector to a higher position. The quality of the rinse aid could also be the problem.
Why won't my IKEA ENASTAENDE start?
Your IKEA Dishwasher might not start due to several reasons: the mains plug may not be properly connected, so ensure it's plugged in. The dishwasher door might be open, so make sure it is completely closed. Also, check your fuse box, as a damaged fuse can prevent the dishwasher from starting; if needed, replace the fuse. Finally, if a delay start is set, either cancel it or wait for the countdown to finish.
General safety precautions for using the appliance in household and similar applications.
Guidelines for safe use by children and vulnerable individuals, including supervision.
Installation and electrical connection safety requirements, including earthing and wiring.
Details on safe electrical connections, plug, cable, and compliance with directives.
Instructions for connecting the appliance to the water supply, including hose safety.
Guidelines for safe operation, including not sitting on the door, handling detergents, and steam.
Information on contacting service centers and required details like model and serial number.
Instructions for safe disposal of the appliance and its components.
Explanation of the floor indicator light system for program status.
Overview of the appliance's control panel buttons and their functions.
Details on activating and using the Multitab option for combined detergents.
Procedure for switching from multi-tablets back to separate detergent, salt, and rinse aid.
Description of the Energy Saver option and its effect on program duration and consumption.
How to enter and use the user mode for setting customization.
Explanation of the water softener's function and its importance for washing results.
Table detailing water hardness levels and corresponding water softener settings.
Step-by-step guide to adjusting the water softener level via the control panel.
Advice on combining multi-tablets with rinse aid for better drying results.
Instructions to activate the rinse aid dispenser, especially when using multi-tablets.
Steps to turn off or on the appliance's acoustic signals for program completion.
Note that acoustic signals for malfunctions cannot be deactivated.
Step-by-step visual guide to filling the rinse aid dispenser.
Step-by-step visual guide to filling the salt container with water and salt.
Instructions on how and where to add detergent for washing.
Indicates how the end of a program is signaled.
Explanation of the automatic power-off feature to save energy.
Detailed steps to initiate a wash program.
How to set a delayed start for a wash program.
Behavior of the appliance when the door is opened during operation.
How to cancel a program that has a set delay start.
Method to cancel a running program.
Guidance on using cleaning agents and their role in washing.
Instructions and tips for correctly loading the dishwasher baskets.
Detailed steps for removing and cleaning the appliance filters.
Steps to clean the filter located in the water inlet hose.
Instructions on how to clean the spray arms if they become clogged.
Guidelines for cleaning the exterior of the dishwasher.
How to clean the interior parts of the appliance, including rubber gaskets.
Troubleshooting tips for issues related to washing and drying performance.
Technical data on required water supply pressure.
Information on water temperature and type for supply.
The appliance's capacity in terms of place settings.
Data on the appliance's power usage in different modes.
General| Brand | IKEA |
|---|---|
| Model | ENASTAENDE |
| Category | Dishwasher |
| Language | English |
To Next Page
