IKEA ENASTAENDE User Manual (English)

Other manuals for IKEA ENASTAENDE

Questions and Answers:

T
Thomas OconnorAug 20, 2025
Why won't my IKEA ENASTAENDE start?
- A
  Allen CarterAug 21, 2025
  Your IKEA Dishwasher might not start due to several reasons: the mains plug may not be properly connected, so ensure it's plugged in. The dishwasher door might be open, so make sure it is completely closed. Also, check your fuse box, as a damaged fuse can prevent the dishwasher from starting; if needed, replace the fuse. Finally, if a delay start is set, either cancel it or wait for the countdown to finish.
A
Alan RobinsonAug 22, 2025
What to do if IKEA ENASTAENDE doesn't drain water?
- L
  lstewartAug 22, 2025
  If your IKEA Dishwasher isn't draining, the sink spigot might be clogged, so try cleaning it. Also, check the water drain hose for any kinks or bends and ensure it is correctly positioned.
E
Edward PattersonAug 25, 2025
What to do if my IKEA ENASTAENDE Dishwasher won't drain water?
- R
  Ronald BurnsAug 25, 2025
  If your IKEA Dishwasher isn't draining water, check to make sure the sink spigot is not clogged. Also, ensure that the drain hose isn't kinked or bent.
N
nclarkAug 26, 2025
What to do if my IKEA Dishwasher is not draining water?
- S
  sandra19Aug 26, 2025
  If your IKEA Dishwasher isn't draining water, check if the sink spigot is clogged and clean it. Also, make sure that the water drain hose does not have a kink or a bend and correct its position.
J
James SmithAug 27, 2025
Why is my IKEA Dishwasher not filling with water?
- B
  Brittany SpencerAug 28, 2025
  If your IKEA Dishwasher isn't filling with water, several factors could be the cause. First, ensure the water tap is fully open. Low water pressure can also be a factor, in which case you should contact your local water authority. Check the water tap for clogs or limescale and clean it if necessary. Also, inspect the filter in the water inlet hose for clogs and clean it. Make sure the water inlet hose isn't kinked or bent, and ensure it's correctly positioned. Finally, if the anti-flood device is activated due to water leakages, close the water tap and contact the service.
J
jesuswoodAug 29, 2025
How to fix wet dishes in IKEA ENASTAENDE?
- B
  Brooke MendezAug 29, 2025
  If your dishes are coming out wet from your IKEA Dishwasher, it could be due to several reasons. The programme might not have a drying phase or may use a low-temperature drying phase. The rinse aid dispenser could be empty. The quality of the rinse aid or the combi detergent tablets could also be the cause. Try a different brand of detergent or activate the rinse aid dispenser and use rinse aid along with the combi detergent tablets.
C
christina92Aug 31, 2025
Why does the salt indicator stay on in my IKEA Dishwasher?
- P
  perezandrewAug 31, 2025
  The salt indicator in your IKEA Dishwasher might stay on after refilling the salt container if you're using salt that takes longer to dissolve. This doesn't affect the appliance's performance. If the indicator remains on after 3 or 4 cycles, contact the service.
N
Nicole BartonSep 2, 2025
How to fix whitish streaks on dishes in my IKEA ENASTAENDE?
- D
  Dana GreenSep 2, 2025
  If you notice whitish streaks or bluish layers on your glasses and dishes after using your IKEA Dishwasher, it could be due to excessive rinse aid. Try adjusting the rinse aid selector to a lower setting. Also, verify that you are not using too much detergent.
D
Daniel JonesSep 4, 2025
What to do if my IKEA ENASTAENDE leaves dishes wet?
- R
  Robert LindseySep 4, 2025
  If your IKEA Dishwasher leaves the dishes wet after a cycle, it might be because the selected program doesn't include a drying phase or uses a low-temperature drying phase. Check if the rinse aid dispenser is empty and refill it if needed. The quality of the rinse aid or multi-tablets could also be the cause; try using a different brand or use rinse aid and multi-tablets together.
B
Brandon WarrenSep 5, 2025
How to fix stains and water drops on dishes in IKEA Dishwasher?
- G
  Gregory MorrisSep 5, 2025
  If your IKEA Dishwasher leaves stains and dry water drops on your glasses and dishes, the rinse aid quantity might be insufficient. Try adjusting the rinse aid selector to a higher position. The quality of the rinse aid could also be the problem.