How to fix whitish streaks on dishes in my IKEA ENASTAENDE?
If you notice whitish streaks or bluish layers on your glasses and dishes after using your IKEA Dishwasher, it could be due to excessive rinse aid. Try adjusting the rinse aid selector to a lower setting. Also, verify that you are not using too much detergent.
Why does the salt indicator stay on in my IKEA Dishwasher?
The salt indicator in your IKEA Dishwasher might stay on after refilling the salt container if you're using salt that takes longer to dissolve. This doesn't affect the appliance's performance. If the indicator remains on after 3 or 4 cycles, contact the service.
How to fix wet dishes in IKEA ENASTAENDE?
If your dishes are coming out wet from your IKEA Dishwasher, it could be due to several reasons. The programme might not have a drying phase or may use a low-temperature drying phase. The rinse aid dispenser could be empty. The quality of the rinse aid or the combi detergent tablets could also be the cause. Try a different brand of detergent or activate the rinse aid dispenser and use rinse aid along with the combi detergent tablets.
Why is my IKEA Dishwasher not filling with water?
If your IKEA Dishwasher isn't filling with water, several factors could be the cause. First, ensure the water tap is fully open. Low water pressure can also be a factor, in which case you should contact your local water authority. Check the water tap for clogs or limescale and clean it if necessary. Also, inspect the filter in the water inlet hose for clogs and clean it. Make sure the water inlet hose isn't kinked or bent, and ensure it's correctly positioned. Finally, if the anti-flood device is activated due to water leakages, close the water tap and contact the service.
What to do if my IKEA Dishwasher is not draining water?
If your IKEA Dishwasher isn't draining water, check if the sink spigot is clogged and clean it. Also, make sure that the water drain hose does not have a kink or a bend and correct its position.
What to do if my IKEA ENASTAENDE Dishwasher won't drain water?
If your IKEA Dishwasher isn't draining water, check to make sure the sink spigot is not clogged. Also, ensure that the drain hose isn't kinked or bent.
What to do if IKEA ENASTAENDE doesn't drain water?
If your IKEA Dishwasher isn't draining, the sink spigot might be clogged, so try cleaning it. Also, check the water drain hose for any kinks or bends and ensure it is correctly positioned.
General| Brand | IKEA |
|---|---|
| Model | ENASTAENDE |
| Category | Dishwasher |
| Language | English |
General safety precautions for using the appliance in household and similar applications.
Guidelines for safe use by children and vulnerable individuals, including supervision.
Installation and electrical connection safety requirements, including earthing and wiring.
Details on safe electrical connections, plug, cable, and compliance with directives.
Instructions for connecting the appliance to the water supply, including hose safety.
Guidelines for safe operation, including not sitting on the door, handling detergents, and steam.
Information on contacting service centers and required details like model and serial number.
Instructions for safe disposal of the appliance and its components.
Explanation of the floor indicator light system for program status.
Overview of the appliance's control panel buttons and their functions.
Details on activating and using the Multitab option for combined detergents.
Procedure for switching from multi-tablets back to separate detergent, salt, and rinse aid.
Description of the Energy Saver option and its effect on program duration and consumption.
How to enter and use the user mode for setting customization.
Explanation of the water softener's function and its importance for washing results.
Table detailing water hardness levels and corresponding water softener settings.
Step-by-step guide to adjusting the water softener level via the control panel.
Advice on combining multi-tablets with rinse aid for better drying results.
Instructions to activate the rinse aid dispenser, especially when using multi-tablets.
Steps to turn off or on the appliance's acoustic signals for program completion.
Note that acoustic signals for malfunctions cannot be deactivated.
Step-by-step visual guide to filling the rinse aid dispenser.
Step-by-step visual guide to filling the salt container with water and salt.
Instructions on how and where to add detergent for washing.
Indicates how the end of a program is signaled.
Explanation of the automatic power-off feature to save energy.
Detailed steps to initiate a wash program.
How to set a delayed start for a wash program.
Behavior of the appliance when the door is opened during operation.
How to cancel a program that has a set delay start.
Method to cancel a running program.
Guidance on using cleaning agents and their role in washing.
Instructions and tips for correctly loading the dishwasher baskets.
Detailed steps for removing and cleaning the appliance filters.
Steps to clean the filter located in the water inlet hose.
Instructions on how to clean the spray arms if they become clogged.
Guidelines for cleaning the exterior of the dishwasher.
How to clean the interior parts of the appliance, including rubber gaskets.
Troubleshooting tips for issues related to washing and drying performance.
Technical data on required water supply pressure.
Information on water temperature and type for supply.
The appliance's capacity in terms of place settings.
Data on the appliance's power usage in different modes.
To Next Page
