IKEA FINSMAKARE

This function is not available for some oven
functions.
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
Clock functions
Clock functions table
Clock function Application
Minute
Minder
To set a countdown
(max. 2 h 30 min). This
function has no effect on
the operation of the
oven.
Press
to turn on the
function. Use the shuttle
to set the minutes and
to start.
Duration
To set how long the
oven works (max. 23 h
59 min).
End Time
To set the switch-off
time for a heating func-
tion (max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the oven
turns off the heating elements
after 90 % of the set time. The
oven uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
Setting the clock functions
Before you use the functions:
Duration, End Time, you must set
a heating function and
temperature first. The oven turns
off automatically.
You can use the functions:
Duration and End Time at the
same time if you want to
automatically turn on and turn off
the oven on a given time later.
The functions: Duration and End
Time do not work when you use
the core temperature sensor.
1. Set a heating function.
2. Press
again and again until the
display shows the necessary clock
function and the related symbol.
3. Use the shuttle to set the necessary time.
4. Press to confirm.
When the time ends, a signal sounds. The
oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It turns
on after the baking or roasting procedure
ends.
ENGLISH
19