Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem Check if...
The appliance does not heat up. The automatic switch-o is deactivated.
The appliance does not heat up. The fuse is not blown.
The appliance does not heat up. The Lock is o.
Components
Problem Check if...
The lamp is turned o. Moist Fan Baking - is turned on.
The lamp does not work. The lamp is burnt out.
The door gasket is damaged. Do not use the appliance. Contact an Author‐
ised Service Centre.
Error codes
The display shows... Check if...
00:00 There was a power cut. Set the time of day.
If the display shows an error code that is not in this table turn the house fuse o and on to
restart the appliance. If the error code recurs contact an Authorised Service Centre.
Cleaning
Problem Check if...
The water leaks out of the cavity emboss‐
ment.
There is too much water in the cavity em‐
bossment.
ENGLISH 29
To Next Page
Loading...
