14
TROUBLESHOOTING
Problem Possible Cause Solution
Burner will not light
using the ignition
system
LP gas cylinder is empty Replace with full cylinder
Faulty regulator Have regulator checked
or replace
Obstructions in burner Clean burner
Obstructions in gas jets
or gas hose
Clean jets and gas hose
Electrode wire is loose Reconnect wire
Electrode or wire is
damaged
Change electrode and
wire
Low ame or ashback
(re in burner tube - a
hissing or roaring noise
may be heard)
LP gas cylinder too small Use larger cylinder
Obstructions in burner Clean burner
Obstructions in gas jets
or gas
Clean jets and gas hose
Windy conditions Use BBQ in a more
sheltered position
Gas valve knob dicult
to turn
Gas valve jammed Replace gas valve
To Next Page
Loading...
