IKEA koppla - Timer Programming; Create Scheduled Light Events

15
2. Press [FUNCTION]
twice followed by [2]
3. State the length of the
delay you would like,
for example after 15
minutes.
The time can be stated
between 1-99 minutes.
NOTE! Pressing the
key again deactivates
the function.
Timer programming
1. Press [PROG]
2. Select the program
number (01-16). Press
[0],[1] for program 1.
The display shows
EMPTY if the chosen
program has not pre-
viously been program-
med. If it has been
preprogrammed the
program settings are
shown.