26
when the receiver powers a connected
lamp.
Deactivate reception:
1. If do not want the receiver to receive
signals from the remote control, press
and hold down the [ON/OFF] for 3
seconds. The
-symbol is shown on
the receiver’s LCD display. Press [ON/
OFF] for 3 seconds to allow the receiver
to receive signals from the remote
control.
Resetting:
If commands are not shown on the
receiver’s LCD display, strange charac-
ters are displayed or it does not react
when keys are pressed the receiver
needs to be reset.
1. Press in ”the small” [R] key. The
receiver shuts off and resets random
on/off, deactivate remote-control and
the set brightness.
To Next Page
Loading...
