How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Setting
and starting a programme”.
2.
Press and hold, at the same time,
and until the indicators of ,
and start to flash.
3.
Press
.
•
The indicators of
and go off.
•
The indicator of
continues to flash.
– The number of flashes of the end in-
dicator show the level of the water
softener.
E.g. 5 flashes + pause + 5 flashes =
level 5.
4.
Press button
again and again to
change the setting.
5. Press the on/off button to deactivate the
appliance and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent this, after the
replenishment, start a programme.
1
2
3
Put 1 litre of water
in the salt container
(only for the first
time).
4
Put 1 kg of salt in
the salt container.
5
6
Filling the rinse aid dispenser
1
2
3
To Next Page
Loading...
