12
EN
DOOR REMOVAL
If your refrigerator will not t through an entrance area, you can remove the doors. Check
rst by measuring the entrance.
1. Make sure the electrical power cord is unplugged from the wall outlet.
2. Remove any food from the door shelves and close the doors.
1. Remove the three screws from both hinge covers
on the left and right top of the cabinet, taking care
not to damage electrical connections or sensors.
2. After the hinge covers are removed, disconnect any harnesses between the cabinet and
doors by grasping both sides of the connector rmly, depress the latch and pull apart.
WARNING
Make sure the electrical power cord is unplugged from the wall outlet.
3. Trace lightly around the door’s top hinges with a
pencil. This makes reinstallation easier.