EasyManua.ls Logo

IKEA TVATTAD - Page 29

IKEA TVATTAD
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
signals operate (if they are active). The
display shows
The indicator of the Start/Pause button
goes o.
The door unlocks and the indicator goes
o.
1. Pr
ess button On/O
to deactivate the
appliance.
After ve minutes fr
om the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end
of the pr
evious programme. Turn
the programme knob to set a new
cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser drawer slightly ajar to prevent
mildew and odours.
Draining water out after end of cycle
If you have chosen a programme or an
option that does not empty out the water of
the last rinse, the pr
ogramme is completed,
but:
The time area shows
and the
display shows the door locked .
The indicator of the Start/Pause
button starts ashing.
The drum still turns at regular intervals to
prevent creases in the laundry.
The door stays locked.
You must drain the water to open the
door:
1. If necessary, touch the Spin
button to
decr
ease the spin speed proposed by the
appliance.
2. Press the Start/Pause
button: the
appliance dr
ains the water and spins.
The option indicator
or goes o.
If you have set and the spin
speed has not been changed,
when you pr
ess the Start/Pause
button, the appliance only
dr
ains the water.
3. When the programme is completed and
the door locked indicator
goes o,
you can open the door
.
4. Press the On/O
button for a few
seconds to deactivate the appliance.
Stand-by function
The Stand-by function automatically
deactivates the appliance to r
educe the
energy consumption when:
You do not use the appliance for 5
minutes when no programme is running.
Press the On/O
button to activate the
appliance again.
5 minutes after the end of the washing
programme.
Press the On/O
button to activate the
appliance again.
The display shows the end of the last
pr
ogramme.
Turn the programme knob to set a new
cycle.
If the programme knob is rotated to the
"Reset" position
, the appliance
automatically turns o in 30 seconds.
If you set a programme or an
option that ends with water in the
drum, the Stand-by function
doesn
't deactivate the appliance
to remind you to drain the water.
ENGLISH 29

Table of Contents