IKEA UPPLEVA - Connecting to a Sound System; Connecting a Gaming Console or DVD Player

21
needs and connect to your network.
Network setup
1. Press MENU on the remote control and
select SETUP > Network > Settings
> Internet Connection. Press / to
select On. Wait until the connection is
automatically established.
2. Select SETUP > Network > Settings
> Connection Test, then press OK/
to check the Internet connectivity. If
it does not work, follow below steps to
make sure of the connectivity.
3. Select SETUP > Network > Settings
> IP Setting, then press OK/ to enter
the IP Setting menu.
─ Set Address Type to Auto, it will
acquire and enter the needed IP address
automatically.
─ You can follow below steps to enter your
IP address manually.
• Set Address Type to Manual, then press
to go to the rst entry eld.
• Enter the IP Address, Subnet Mask,
Default Gateway, Primary DNS and
Secondary DNS values. Use the digit
buttons to enter numbers and the arrow
buttons to move from one entry eld to
another.
─ After setting, select Setup > Network
> Settings > Connection test to check
the Internet connectivity again.
4. Select SETUP > Network > Settings
> Information, then press OK/
to display the information on current
connection, such as Interface, Address
type, IP address, etc.
Browse PC through Share & See
If you have photos, videos or music les
stored on a computer connected through a
home network, you can play your les on
your TV.
Connecting to your PC
Make sure to set up a wired or wireless
connection from your TV to a router rst.
Then connect your PC to your router either
through a network cable or wirelessly.
Also make sure SETUP > Network >
Settings > Internet Connection is On
and your computer reware won’t block the
connection.
Enabling Share & See function
Select SETUP > Network > Applications
> Share & See, and set it to On.
Follow the steps in turn specied hereafter.
Adding media from your PC for sharing
Install a Share & See media server on your
PC. The simple and familiar server you may
install is Microsoft Windows Media Player 11.
Allow your TV to share the designated les
on your PC.
1. Open the Microsoft Windows Media
Player 11.
─ Select Library > Media sharing.
─ Check the checkbox Share my media
to.
─ Select the icon of the TV connected to
your PC.
─ Select Allow to allow the TV to access
your PC, and select OK to enable your
allowing.
Note: Use the Settings button to customize
your desired settings.
2.
─ Select Library > Add to Library.
─ Select your personal folders or folders
of other users that you can access for
sharing.
─ Select Add and press OK to enable your
adding.
Share & See application
Select MEDIA in the main menu and press
OK to enter media center. Then you can
view photos, listen to music or watch videos,
which are stored on your PC.
Smart TV
Allows you to enjoy internet applications
(Apps), specially adapted internet websites
for your TV. You can control the Apps with
the TV remote control.
WARNING:
• Congure the network settings before
using Smart TV.
• Slow responses and/or interruptions
may occur, depending on your network
conditions.
• If you experience a problem using an
application, please contact the content
provider.
• According to circumstances of the
contents provider, an application's
updates or the application itself may be