What to do if my IKEA Dishwasher doesn't fill with water?
If your IKEA Dishwasher isn't filling with water, check the following: * Ensure the water tap is fully open. * Verify that the water supply pressure isn't too low. * Make sure the water tap isn't clogged. * Inspect the filter in the inlet hose for clogs and clean it if necessary. * Confirm that the inlet hose has no kinks or bends.
What to do if my IKEA VALGJORD Dishwasher does not drain water?
If your IKEA Dishwasher isn't draining water, check to make sure the sink spigot is not clogged and that the drain hose has no kinks or bends.
What to do if IKEA VALGJORD Dishwasher programme does not start?
If the program on your IKEA Dishwasher isn't starting, make sure the appliance door is completely closed. If the delay start function is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may have started a procedure to recharge the resin inside the water softener, which lasts approximately 5 minutes.
What to do if my IKEA VALGJORD Dishwasher does not drain the water?
If your IKEA Dishwasher isn't draining water, first check if the sink spigot is clogged. Also, ensure that the drain hose isn't kinked or bent, as this can obstruct the water flow.
Why are the washing results poor with my IKEA VALGJORD?
For poor washing results with your IKEA Dishwasher, use more intensive washing programmes. If you are using multi-tablets, always switch on the Multitab option.
Why are there traces of rust on cutlery in my IKEA Dishwasher?
Traces of rust on cutlery in your IKEA Dishwasher could be due to too much salt in the water used for washing. Also, avoid placing silver and stainless steel items close together.
How to improve poor washing results in my IKEA Dishwasher?
To address poor washing results with your IKEA Dishwasher, consult the "Daily use", "Hints and tips" and basket loading leaflet for guidance. You may also need to use more intensive washing programs or clean the spray arm jets and filter, referring to "Care and Cleaning."
Why is my IKEA Dishwasher making tableware dull?
If you see dull, discoloured or chipped tableware after washing in your IKEA Dishwasher, make sure that only dishwasher-safe items are washed in the appliance. Also, load and unload the basket carefully, referring to the basket loading leaflet, and place delicate items in the upper basket.
Why does the salt indicator stay on after refilling my IKEA VALGJORD Dishwasher?
If the salt indicator remains on after refilling your IKEA Dishwasher's salt container, it might be because you are using salt that needs more time to dissolve.
Why are there stains and dry water drops on dishes from my IKEA VALGJORD?
Stains and dry water drops on glasses and dishes from your IKEA Dishwasher may be due to an insufficient amount of rinse aid being released. Try adjusting the rinse aid level to a higher setting. The quality of the rinse aid itself could also be the cause.
General| Type | Built-in |
|---|---|
| Noise level | 44 dB |
| Capacity | 14 place settings |
| Width | 60 cm |
| Depth | 55 cm |
| Height | 82 cm |
Safety guidelines for children and vulnerable individuals using the appliance.
Basic safety precautions for operating the appliance.
Explanation of the floor indicator light for program status.
Identification and function of control panel buttons and display.
Explanation of various indicator lights and their meanings.
Details of available wash programs and their settings.
How to use the DryPlus option for improved drying performance.
Details on the ExtraHygiene option for enhanced hygiene.
How to select programs and configure user settings.
Information about the rinse aid dispenser and its function.
Guide to adjusting the amount of rinse aid dispensed.
Description of the automatic deactivation feature for energy saving.
General advice for optimal cleaning, drying, and environmental care.
Best practices for using rinse aid and detergent.
Causes and solutions for ineffective dishwashing.
Reasons and remedies for dishes not drying properly.
To Next Page
