EasyManua.ls Logo

IKEA VALGJORD - Rinse Aid Notification Management; Acoustic Signals Explained; Initial Setup and Preparation

IKEA VALGJORD
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The rinse aid empty notification
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators , and start
to flash and the display is blank.
2. Press .
The indicators
and go
off.
The indicator continues to flash.
The display shows the current setting:
= the rinse aid empty notification
is activated (factory setting).
3. Press to change the setting.
= the rinse aid empty notification is
deactivated.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is activated but it
is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators
, and start
to flash and the display is blank.
2. Press
The indicators and go off.
The indicator continues to
flash.
The display shows the current setting:
= Acoustic signal on.
3. Press to change the setting.
= Acoustic signal off.
4. Press the on/off button to confirm the
setting.
Before first use
1. Fill the rinse aid dispenser.
2. Open the water tap.
3. Start a program to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
ENGLISH 12

Other manuals for IKEA VALGJORD

Related product manuals