IKE 4 User Manual 27
Subform
Subform can be used for two
purposes:
a. Used to group common elds for an
object, such as equipment.
b. Used to create parent-child
relationships between two objects.
For example, the Span would be the
“parent” subform and the Circuit
would be the “child” sub-subform.
Subform
Height
Tool used to capture height above
ground, such as a wire mid-span height.
Vector
Tool used for measuring azimuth
and distance between two points,
such as a span length and the angle
between two utility poles.
To Next Page
Loading...