Ikra ICPH 2040 - Technical Data; General Power Tool Safety Warnings

16
GB
ENGLISH
TECHNICAL DATA
Cordless-Chain saw ICPH 2040
Battery voltage 20 V
Usable cutting length 400 mm
Usable cutting width 18 mm
Device length 2,20 - 2.75 m
Weight with battery 3,45 kg
Vibration details
Vibration total values (triaxial vector sum) determined according to ISO 22867,
Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
<2,5 m/s
2
Noise information
Measured according to
1)
EN 60745 ;
2)
2000/14/ EG+2005/88/EC
Sound pressure level L
pA
1)
Unsicherheit K = 3 dB (A) 79,4 dB (A)
Guaranteed sound power level 93 dB (A)
Recommended battery types Typ LI 22 / LBC202Z-2
Recommended charger CGB20/JLH262102000G
Technical changes reserved.
WARNING: The declared vibration total value(s) and the declared noise emission value(s) were measured according
to a standardized test method according to EN 60745 and can be used to compare one power tool with another. The
declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent
applications, with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly
increase the exposure level over the total working period. The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down or when
it is running but not actually inuse. This may signicantly reduce the vibratoryload over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY WARNINGS
Read and understand the operating instructions
before using the appliance. Familiarise with the control
elements and how to use the appliance properly. Abide
by all the safety measures stated in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
In case of any doubts about connection and operation
refer please to our customer center
General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions.Failure to follow the warnings and
instructions may result in electric shock, re and/or
serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to your
mains-operated (corded) power tool and battery-
operated (cordless) power tool.