Ikra ICPH 2040 - Troubleshooting; Maintenance

21
Troubleshoong
Warning! Always remove the rechargeable battery before inspection and adjustment work.
Check the rechargeable baery capacity. If the charge level is low, this can lead to more
blockages. Connue working with a fully charged rechargeable baery.
The following table lists error symptoms and describes how remedial acon can be taken
if your machine is not working properly. If this does not help to locate and eliminate the
problem, contact your service workshop
Cause Fault Remedy
Telescopic hedge trimmer is not
working
The baery is empty See “Charging the rechargeable
baery“
The baery is faulty Have it replaced by our
specialist service department.
Telescopic hedge trimmer is
working irregularly
Loose internal contact Visit a specialist workshop
On/o switch is defecve Visit a specialist workshop
Cung blade runs hot Too much fricon due to too
lile lubricant
Apply lubricant spray
Poor cung performance /
unclean cut
Blunt cung blade Sharpen/replace cung blade
MAINTENANCE
DANGER
Remove the battery pack before starting any
adjustment, cleaning and maintenance work
on the device. Wait until all rotating parts have stopped
and the appliance has cooled down.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never clean
the machine and its components with solvents, ammable
or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insucient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specied in these Instructions may only
be performed by qualied authorised sta
GB
ENGLISH