17
14. Troubleshooting guide
PROBLEME CAUSE REMEDY
WARNING: Make sure the icing prevention system is not working.
1) Starting failure Check fuel for water or substandard
mixture.
Replace with proper fuel
Check for engine ooding Remove and dry the spark plug.
Then pull the starter again with no
choke
Check spark ignition Replace with a new plug
2) Lack of power/Poor acceleration/
Rough idling
Check fuel for water or substandard
mixture
Replace with proper fuel
Check air lter and fuel lter for
clogging
Clean
Check carburetor for inadequate
adjustment
Readjust speed needles
3) Oil does not come out Check oil for substandard quality Replace
Check oil passage and ports for
clogging
Clean
If the unit seems to need further service, please consult with an authorized service shop in your area.
To Next Page
Loading...
