become intermittent. When the internal battery charge is very low, the LED will flash
red and a melody will play alerting you to recharge your speaker as soon as possible.
Plug the speakerphone into a USB port on your computer or into a DC 5V, 500mA
and up USB power adaptor (not included) using the included USB cable. Disconnect
the USB cable from the speakerphone as soon as it is fully charged.
Charging in Power ON mode
The LED flashes RED + BLUE while charging.
The Red LED will turn off automatically when the battery is fully charged.
Note: 1. Charging time will vary if you are listening to music while charging the
internal battery. We recommend you switch off the speakerphone
power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended that
you completely discharge it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance
and longer battery life. If you don’t use the player that often, be sure to
recharge the battery at least once a month in order to keep the
internal battery working properly.
Charging in Power OFF mode
The LED will be RED whilst charging.
The LED will turn off automatically when the battery is fully charged.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Lithium batteries must be recycled. Do not dispose of in the bin.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and
current settings are correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or
liquids.
Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
Follow the manufacturer’s instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged or not in use.
ON/OFF
1. Slide the ON/OFF button to the ON position, a beep will be heard to indicate the
speaker is ON, and the LED will flash blue 3 times. It will then automatically enter
pairing mode. The LED will flash blue and red whilst waiting for a Bluetooth device
to pair with it.
2. To turn the unit OFF, just slide the ON/OFF button to the OFF position. Don’t forget
to turn off the Bluetooth feature on your Mobile Device.
SPEAKER OPERATIONS
PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER
BLUETOOTH ENABLED DEVICE TO THE IKUone
1. If the IKUone has never been paired with a Bluetooth device before: You need to
follow the pairing instructions below to link the speaker with your Bluetooth
device.
Turn your speaker ON, a beep will be heard a beep will be heard to indicate
the speaker is ON, and the LED will flash blue 3 times.
When the LED flashes Red and Blue, The speaker is ready to pair (link) with
To Next Page
Loading...