TM60Pi (06/00) PAG. 1
1.- DESCRIPTION
The TM60/3, TM60/4, TM60/5, TM60/6, TM60/7, and TM60/8 console type transmitter radio
remote control systems, are designed for the remote control of hoists and cranes (overhead
cranes, tower cranes, hydraulic loader cranes, concrete pumps, driverless vehicles, etc) and
are particularly suitable for applications when the operator needs to be able to choose the
best location from which to carry out an operation.
The system consists of a transmitter for selecting commands and a receiver which is
connected to the electrical system of the machine to be operated. The system also comes
with a battery charger and two rechargeable batteries.
The main specifications are as follows:
The TM60
Frequency band 405 a 475 MHz
Response Time 100 ms
Temperature range -20º a +65ºC
The TM60/3, TM60/4, TM60/5, TM60/6, TM60/7, and TM60/8 transmitters
Transmission power 10 mW
Protection IP65
The R60/9, R60/18, R60/26 and R60/38 receivers
Power supply 48, 115, 230 Vac ± 10%, 50/60 Hz
Optional 12 or 24 Vdc
Consumption 30 to 40 W, depending on models
Relays 230 Vac/8 A
Protection IP55
The CB60 battery charger
Power supply 230 Vac ± 10%, 50 Hz;
optional 115 Vac, 60 Hz or 24 Vdc
The BT12 batteries
Voltage 7,2 V
Capacity 1200 mAh
Charging temperature 5º a 35ºC
Autonomy 8 to 12 h, depending on models
To Next Page
Loading...
