1. Power on the unit by pressing and holding the Power/Pair
button for ~4 seconds. The indicator will ash red and blue.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, select
“IAEB34” in your Bluetooth settings to pair. If your device
requests a password, enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices. After initial pairing, the unit will stay
paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you nd it is unable to
connect, repeat the above steps.
Pairing a Bluetooth Device
To Next Page
Loading...
