Truly Wire-Free Earbuds
User’s Guide for Model IAEBT209 v2341-01
Charger Power
ON/OFF
Main Function Button
Press and hold to power ON.
Press and hold for 2 sec. to skip forward.
Press and hold for 5+ sec. to power OFF.
Earbud Charging Tip
Charging the Earbuds
1. Open the cover and place the earbuds in their docking
stations. Be sure to press down so the earbuds make
contact with the charging tip.
2. Press the Power button on the case to power it ON and
charge the earbuds.
3. When charging, the indicator LEDs on the earbuds will
turn red. When charging is complete, the indicators on
the earbuds will turn blue.
Charging the Case
Using a Micro-USB to USB cable, connect
to the USB port of a powered on computer
or USB power adaptor (not included) to
charge the case.
PRESS TO OPEN
PRESS TO OPEN
Microphone
Charger Battery Indicator LED
Red when charging.
Flashing red when charging is
complete.
Charger Power Indicator LED
Blue when ON.
NOTE: Each earbud must be
powered ON and OFF separately.
Earbud Indicator LED
Red when charging.
Blue when fully charged.
To Next Page
Need help?
General
