Truly Wire-Free Earbuds
User’s Guide for Model IAEBT270 v2470-01
Volume/Skip
Press to adjust volume.
Press and hold to skip ahead
or back.
LED Indicator
Flashing red and blue= Ready to pair
Solid red= Charging
Note: When fully charged the light
will change to blue for a few seconds
and then turn o.
Function Button
Press and hold to power ON or OFF.
Press to play or pause audio.
Press to answer incoming phone call.
Press quickly 2 times to manually pair.
Orientation & Controls
Controls are the same on both earbuds.
Charging the Case
Note: Placing the earbuds in the case will automatically
power them OFF.
• Using a USB-C to USB cable, connect to the USB
port of a powered on computer or USB power
adaptor (Not included).
• Initial charge time is approximately 2 hours.
Charge fully before use.
• While the case is charging, the Case LED will
display a blinking red light. When the unit is fully
charged it will display a solid red light.
Features
• True Wireless Stereo
• Sweat proof
• Bluetooth Wireless: range 49 ft.
• Built-in microphone
• Voice prompts announce earbud
operations
• Digital volume control
• Built-in rechargeable battery:
approximately 5 hrs playtime at 50%
• USB-C port for battery recharge
Includes
• 3 pairs of eartips: 1 small, 1 medium,
1 large
• Charging case
• USB-C to USB charging cable
• User’s Manual
Charging Contacts
Case Power
Button
Press to activate
charging.
Case LED
Solid blue when ON.
Place earbuds onto
Charging Contacts
in the case to start
charging.
IAEBT270-2470-01-IB - 03Mar2020.indd 1 3/3/2020 10:43:05 AM
To Next Page
Need help?
General
