iLive IAEBT600 User Manual

Charging the Case
Using a USB-C to USB cable (included),
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case. When the case is
charging the Power & Battery Indicator LEDs
will ash white. When fully charged all LEDs
will turn solid white.
Truly Wire Free Earbuds
User’s Guide for Model IAEBT600 v2559-01
Power & Battery Indicator LEDs
The 4 white LEDs represent the amount of battery
the case charger has.
1 LED=25%
2 LEDs=50%
3 LEDs=75%
4 LEDs=100%
Function Button
Press and hold to power ON
Press to play/pause music.
Press to answer/end phone calls.
Press and hold for 2 seconds to reject incoming calls.
Press and hold for 5 seconds to power OFF.
Press and hold for 2 seconds to activate voice assistant (LEFT).
Quickly press twice to skip to next track (RIGHT).
Quickly press twice to play previous tracks(LEFT).
Press and hold for 2 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
Charging Contacts
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts.
Be sure to match the left and right earbuds with the correct
docking station in the case.
2. When charging, the rst and fourth Power & Battery Indicator
LEDs on the case will ash white. When charging is complete,
the indicator LEDs will turn o.
3. Earbud Indicator LEDs will turn red when charging. When fully
charged, the LEDs will turn o.
Microphone
Earbud Indicator LED
Red when charging.
Lights o when fully charged.
IAEBT600-2559-01-IB - 04Aug2020.indd 1 8/4/2020 10:32:47 AM

iLive IAEBT600 Specifications

General

Wireless	Yes
Charging Time	2 hours
Microphone	Yes
Frequency Response	20 Hz - 20 kHz
Impedance	32 Ohms
Driver Size	40mm
Foldable	Yes
Connectivity	Wireless
Bluetooth Range	33 ft

Summary

Charging the Earbuds

Placing Earbuds for Charging

Insert earbuds into charging contacts, matching left and right positions correctly.

Charging Indicator Lights

Case LEDs flash white during charging; earbud LEDs turn red. Both turn off when fully charged.

Charging the Case

USB-C Charging Process

Connect via USB-C to a powered source. Case LEDs flash white while charging and turn solid white when full.

Bluetooth Pairing

Pairing and Connection Steps

Power on earbuds, search for IAEBT600 on your device, and connect for audio playback.

Speakerphone Functions

Call Management

Press the function button to answer or end phone calls.

Charging Case & Auto-On Feature

Automatic Power Management

Earbuds auto-off/charge in case; auto-on/reconnect when removed from case.

Noise Control Modes

Active Noise Canceling

Electronically mutes background noise to enhance audio quality.

Transparent Mode

Picks up external sounds to keep you aware of your surroundings.

Safety and Compliance Warnings

General Safety Precautions

Covers fire/shock hazards, battery disposal, hearing damage, and chemical exposure warnings.