iLive IAHB16 User Manual

DC IN
AUX IN
MICRO
SD
FEATURES & CONTROLS
WIRELESS HEADPHONES
User’s Guide for Model No. IAHB16 v1312-01
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed
of according to state and local guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects,
or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Power/Pair
Press and hold to turn
the unit On or O.
Press and hold for 4 sec.
to turn the unit on and begin pairing.
SD/BT
Press to switch between SD Card
or Bluetooth modes.
Skip Fwd/Rev/Vol +/−
Press to skip forward
or back an audio track.
Press and hold to set volume level.
Micro SD
Memory Card Slot
AUX In
(3.5mm audio input)
DC Power Input
Power/Pairing
Indicator Light
Play/Pause
Press to play or pause
the current track.
Features
• SupportsBluetooth
• Wirelessrange:33feet
• Built-inmicrophone
• Auxin(3.5mmaudioinput)
• Adjustableheadband
• On-earcontrols
• DCbatterypower:built-in
rechargeablelithiumionbattery
• Batterylife:approx.6hours
at50%volume
• Micro-USBportforbatteryrecharge
Includes
• Micro-USBtoUSBcable

iLive IAHB16 Specifications

General

Brand	iLive
Model	IAHB16
Category	Headphone
Language	English

Summary

FCC Warnings and Compliance

FCC Compliance Statement

Equipment tested for Class B digital device limits; may cause interference if not used correctly.

Wireless Headphones Features and Controls

Play/Pause Control

Press to play or pause the current audio track.

Skip and Volume Control

Press to skip tracks; press and hold to adjust volume.

Mode Switch (SD/BT)

Press to switch between SD Card and Bluetooth modes.

Power and Pairing Button

Press and hold to turn the unit on/off; press for 4 sec. to begin pairing.

Power/Pairing Indicator Light

Indicates power status and Bluetooth pairing mode.

Additional Warnings and Precautions

Hearing Safety

Turn volume down before connecting; gradually increase to a comfortable level.

Battery Disposal and Safety

Recycle lithium-ion batteries; do not incinerate as they may explode.

California Proposition 65 Warning

Product may contain chemicals known to cause birth defects or reproductive harm.

Bluetooth Connectivity

Bluetooth Device Pairing

Steps to power on, pair, and connect your device via Bluetooth.

Wireless Audio Playback

Instructions for playing audio from a connected Bluetooth device.

Alternative Audio Inputs

Aux In Audio Input Usage

Connect a 3.5mm audio cable for wired audio playback.

Micro-SD Card Installation

Steps to insert a Micro-SD card for MP3 playback.