10
Pairing a Bluetooth Device
Bluetooth Setup
1. Power on the unit by pressing
the Power button.
2. Press the Source button to
switch to Bluetooth Mode.
3. Press and hold the Pair button.
4. The Pairing Indicator will ash blue
and a voice will say “Speaker is Pairing”.
When pairing, remain within
3 feet of the unit.
5. Using the native controls on your
Bluetooth device, select the “ISDB752”
in your Bluetooth settings to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specic device for instructions on pairing
and connecting Bluetooth devices.
6. When successfully paired and
connected, the Pairing Indicator
will display a solid blue light and a
voice will say “Speaker is paired”.
After initial pairing, the unit
will stay paired unless unpaired
manually by the user or erased
due to a reset of the device.
If your device should become unpaired,
follow the above steps again.
If any pairing issues should occur, un-
pair the unit on your Bluetooth device
and follow the above steps again.
Playing Audio Wirelessly
1. Follow the instructions for
Pairing a Bluetooth Device.
2. Use the native controls on
the connected Bluetooth
Device to select a track.
3. To play, pause or skip the selected
track, use the native controls
on the connected Bluetooth
Device or press the Pair/Play/
Pause or Skip/Search buttons.
4. Audio played through the connected
Bluetooth device will now be
heard through the speakers.
To Next Page
Loading...
