iLive ITP582 - Clock and Alarm Functions; Setting the Clock and Alarm

8
1. Follow the instructions for
Docking an iPod or iPhone.
Auto time sync will not work with all iPods.
2. Upon initial use, the clock will automatically
sync to the time of the docked iPod or iPhone.
After initial use, press and hold the Clock button to
sync the time from the connected iPod or iPhone.
Auto Time Sync for iPod and iPhone
1. Press the Power button to turn the power o.
2. Press the Clock button on the remote.
The hour on the display will begin blinking.
3. Press the Fwd/Rev buttons on the
remote to adjust the hour.
4. Press the Clock button.
The minute on the display will begin blinking.
5. Press the Fwd/Rev buttons on the
remote to adjust the minute.
6. Press the Clock button to nish setting the clock.
1. Press the Power button to turn the power o.
2. Press the Alarm button on the remote.
The hour on the display will begin blinking.
3. Press the Fwd/Rev buttons on the
remote to adjust the hour.
4. Press the Alarm button.
The minute on the display will begin blinking.
5. Press the Fwd/Rev buttons on the
remote to adjust the minute.
6. Press the Alarm button.
The source on the display will begin blinking.
7. Press the Fwd/Rev buttons on the remote
to switch between iPod and FM modes.
8. Press the Alarm button to
nish setting the timer.
After the set time is reached, the sound bar will
automatically power on to the set source.
1. Press the Power button to turn the power o.
2. Press and hold the Alarm button to
activate or deactivate the timer.
The letter “T” will appear on the display
when the timer is activated.
Setting the Clock Setting the Alarm
Activating the Alarm
Clock and Alarm