Stereo Audio System for Your iPod V10M10_IM_EN_12072007
www.i-Luv.com - 27 -
TROUBLESHOOTING GUIDE
Troubleshooting – Continued
o Make sure the devices are not too far away from each other.
o Make sure to put the correct password (The default password for BluePin
TM
is “0000”).
o Check with your devices manual if the device supports other Bluetooth products.
o Make sure both devices are in pairing mode to accept connections from each other.
o Make sure the Bluetooth device you are using is Bluetooth Version 1.2 or higher for stable connectivity. (Some of the V1.1 devices might not
be fully compatible with BluePin
TM
. Make sure to check your Bluetooth devices manual for compatibility issues).
• Can not pair with stereo headset with Bluetooth wireless technology made by other manufacturers.
o This could happen if the device has its own security method, or unique password other then “0000”. Please check with the manufacturer for
compatibility issues. For full compatibility we recommend iLuv Bluetooth Stereo Headset.
o Make sure headset supports A2DP Bluetooth Stereo Profile.
o Make sure the device is fully charged and you are not too far away from the BluePin
TM.
unit.
o Make sure you are not using mono headset to pair. (This will not work since mono headset uses different Bluetooth profile. If profiles do not
match with the devices you are connecting to, pairing will fail. Please check your device manual, or check with manufacturer to see if device
has matching A2DP Bluetooth Stereo Profile)
• There seems to be noticeable delay between the devices with Bluetooth wireless technology and i399/i398.
o This is normal when using devices using Bluetooth wireless technology.
• Remote functions like play/pause skip/fwd skip/bkwd do not work
o Depends on the device these function might be disabled due to software issues.
o Please refer to owner’s manual of the device you are using.
To Next Page
Loading...
