ILVE AG60 - Periods of Inactivity; Ordinary Maintenance

13
USER
PERIODS OF INACTIVITY
When not using the equipment for extended periods of times:
• disconnect the equipment from the power supply.
• if possible, use a soft cloth to apply a thin layer of Vaseline oil to all stainless steel
surfaces.
At rst use:
• accurately clean the equipment;
• reconnect the power supply
ALWAYS MAKE SURE THAT THE APPLIANCE IS DISCONNECTED FROM THE NETWORK
1-2. Remove the metal lters
3. Push the spotlight from the inside to the outside
4. disconnect and replace the entire spotlight
PROCEDURE
TO FOLLOW
2
1
Fig. 5.
ORDINARY MAINTENANCE - replacement of the spotlight