iM3 SP6 - Section X. Specifications; Section XI. Disposal

- 26 -
SECTION X: SPECIFICATIONS
The ART-SP6 scaler is designed and manufactured to meet the most demanding environment. It’s
specifications are listed below
Classification
 Protection against electric shock：Class I
 Degree of protection against electric shock：Type BF
 Mode of operation：Continuous
 Medical device directive：IIa
Standards Followed
ISO13485: Medical Devices, Quality Management Systems, Requirements for regulatory
purposes
93/42/EEC: MDD CE Directive
EN60601-1: Medical Electrical Equipment, General Requirement for Safety
EN60601-1-2: Medical Electrical Equipment, Electromagnetic Compatibility,
Requirements and Tests
 Specification
• Power supply
115V ±5%
～
50/60Hz 125VA
230V ±5% ～50/60Hz 125VA
• Working frequency
26KHz ~ 32KHz
• Polisher speed
3000
～
30000 R.P.M
• Water supply
25
～
60 PSIG(172~414KPa)
• Dimension
23cm(L) x 21cm(W) x 9cm(H)
• Weight
3.7 Kg (including the handpiece)
• Hand piece Cable
250 cm
• Footswitch Cable
250 cm
Operation environment
•
Temperature
0 ℃~40 ℃
• Relative Humidity
10% ~ 90% (non-condensing)
Transport and storage conditions
•
Temperature
0
℃~ 60℃
• Relative Humidity
10% ~ 90% (non-condensing)
• Atmospheric pressure
860~1060 hPa
SECTION XI: DISPOSAL
Please follow county and state regulations for disposal of the ART-SP6.