Please Read Before Operating:
Make sure the device is connected to a grounded outlet. Failure to
meet this requirement may severely damage the user and device.
Place the device on a flat and stable surface. Placing the device
on a tilted or unstable surface may degrade performance and
also cause damage to the device.
Do not modify the device. Modifications to the device will
invalidate the safety codes and warranty while endangering the
patient and operator.
Do not place heavy objects on top of the power cord and keep the
power cord away from intense heat.
Unplug the device and call your local dealer or BONART for service
and instructions if you observe any abnormalities while operating the
device.
To Next Page
Loading...
