Need help?Do you have a question about the ImageWorks IMAGE-VET 70 PLUS and is the answer not in the manual?
General| X-Ray Tube Voltage | 70 kV |
|---|---|
| Total Filtration | 2.5 mm Al equivalent |
| Power Supply | 220V, 50/60 Hz |
| Exposure Time | 0.02-3.2 sec |
| X-Ray Tube Current | 8 mA |
Details wiring from x-ray tube and power switch to the control board.
Flowchart for diagnosing absence of X-Ray or light output.
Explains specific error codes E001 through E006 and their causes/solutions.
Flowchart for resolving E009, checking fuse, voltage, and resistance.
Flowchart for resolving E010, checking wiring, voltage, and resistance.
Addresses issues with the ready light and general machine operation.
Details jumper and wiring configurations for dual tube head setups.
To Next Page