Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
147
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Analog Video/
600 Stereo
Analog Audio
(P-12×1VA2L)
Table 5-21 Analog Video/Stereo Analog Audio Performance Specifications
Item
Specification
Analog Video Stereo Analog Audio
Gain Unity ± 0.1 dB Unity, ± 0.1 dB
Differential gain < 0.15% at 3.58 MHz and
4.43 MHz
—
Differential phase < 0.15° at 3.58 MHz and
4.43 MHz
—
THD+N — <0.01%, 20 Hz to 20 kHz,
+24 dBu
IMD (SMPTE 4:1) — <0.01%, +24 dBu
Tilt < 0.1% —
Crosstalk 62 dB isolation from DC to
5MHz
>90 dB isolation, 20 Hz to
20 kHz, all hostile
Frequency response ± 0.05 dB from DC to 10
MHz
± 0.25 dB from 10 MHz to
35 MHz
+2 dB to –3 dB from 35
MHzto50MHz
<±0.1 dB, 20 Hz to 20 kHz
–3 dB point: >200 kHz
Phase scatter < ± 1.5° —
Gain scatter < ± 0.1 dB —
DC offset < ± 50 mV < ± 50 mV
Signal to noise ratio > 65 dB, 5 MHz bandwidth >110 dB ref. to +24 dBu,
20 Hz to 20 kHz
Table 5-22 Analog Video/600 Stereo Analog Audio Input Specifications
Item
Specification
Analog Video Stereo Analog Audio
Number of inputs 12 12 stereo channels
Signal type Composite or (or
component when used in a
multiframe system) analog
video, or any video or RF
signal within the voltage
and frequency limits
Balanced analog audio
Connector 75 BNC per IEC 169-8 DB-62 (terminal strip
adapters available)
Impedance 75 600
Signal coupling DC —
To Next Page