Warning and error messages
The output is connected to a battery
with incorrect polarity.
This will be displayed in case of detect-
ing an interruption of the connection
between battery and output or volun-
tarily disconnection the charge lead dur-
ing the operation of charge or dis-
charge on output.
There was a short-circuit at OUTPUT.
The voltage of input power lowers the
limit.
The voltage of lithium battery pack
was selected incorrectly. Verify the
voltage of battery pack
B5 incorporates a various functions of protective
and monitoring the system to verify functions and
the state of its electronics. In any case of
occurring error, the screen displays the cause of
error that is self-explanatory with audible Sound.
There happens malfunction at the unit
byany reason.
The processor detects the voltage
difference during charging.
The processor detects the voltage
difference during charging.
Reversed polarity
Connection break
SHOT ERR
IN VOLTAGE ERR
VOL SELECT ERR
BREAK DOWN
BATTERY CHECK
LOW VOLTAGE
BATTERY CHECK
OVER VOL TAGE
BATTERY VOL ERR
Specifications
Operating voltage range: 10.0~18.0 Volt
Circuit power:
max.50W
Charge current range: 0.1~5.0A
Current drain for balancing Li-po: 200mAh/cell
NiCd/NiMH battery cell count:
1~14cell
li-ion/Polymer cell count:
15 series
Pb battery
voltage:
6V, 12V
Weight:
280g
Dimensions: 130*80*23mm
Warranty and service
We warrant this product for a period of one year
(12 months) from the date of purchase. The
guarantee applies only to such material or
operational defects, which are present at the time
of purchasing the product. During that period, we
will repair or replace without service charge any
product deemed defective due to those causes.
You will be required to present proof of purchase
(invoice or receipt). This warranty does not cover
the damage due to wear, overloading, incompe-
tent handling or using of incorrect accessories.
The voltage of one of the cell in the Li-
poly battery pack raised over the limit.
B5
li-ion/Polymer Balance Charger
To Next Page
Loading...
