Need help?Do you have a question about the Imax B8 and is the answer not in the manual?
General| Input Voltage | 11-18V DC |
|---|---|
| Circuit Power (Charge) | 80W |
| Circuit Power (Discharge) | 10W |
| Discharge Current | 0.1-1.0A |
| NiMH/NiCd cells | 1-15S |
| Pb battery voltage | 2-20V |
| Dimensions | 133x87x33mm |
| LiPo/LiFe/Lilon cells | 1-6 cells |
Features built-in individual cell balancing for Lithium batteries during charge/discharge.
Incorporates Delta-Peak Sensitivity and auto-charge current limits for safe operation.
Covers essential safety guidelines for charger operation and environment.
Sets nominal voltage type and cell count verification time for Lithium batteries.
Details CV/CC charging method and critical final voltage matching for LiIo, LiPo, LiFe.
Explains how to set charge current and voltage for Lithium batteries.
Guides on setting discharge current and final voltage for Lithium batteries.
Explains how the charger monitors and balances individual cells during storage/discharge.
Covers setting charge current limits and modes ('Aut', 'Man') for NiCd/NiMH.
To Next Page
