Set discharge current on the left and final voltage
on the right. The discharge current ranges from
0.1 to 5.0A. To start the process, press
Start/Enter key for more than 3 seconds.
The screen displays the current state of
discharge. You can alter the discharge current by
pressing Start/Enter key during the process.
Once you change the current value, store it by
pressing Start/Enter button again.
To stop discharging press Batt type/Stop key
once. The audible sound indicates you at the end
of process.
DEC
INC
Batt type
stop
Start
Enter
`>3seconds`
DEC
INC
battery
type
elapsed
time
discharge
current
battery
voltage
discharge
capacity
B8 has a data storage and load program for your convenience. This feature can store
up to 10 battery data by number that represent the individual specification of batteries
you are using. They can be called back for the process of charging or discharging
without setting up the program again. To set up the parameter value in the program,
press Start/Enter key to make it blink then change the value with Inc> or <Dec key.
22
To Next Page
Loading...
