Set discharge current on the left and final voltage on
the right. The discharge current ranges from 0.1 to
5.0A and the final voltage ranges from 0.1 to 30.0V.
to start the process, press Start/Enter key for more
than 3 seconds.
The screen displays the current state of discharge.
You can alter the discharge current by pressing
Start/Enter key during the process. Once you
change the current value, store it by pressing
Start/Enter button again. To stop discharging press
Batt type/Stop key once. The audible sound
indicates you at the end of process.
DEC
INC
Batt type
stop
Start
Enter
`>3seconds`
battery
type
elapsed
time
charge
current
battery
voltage
discharged
capacity
DEC
INC
19
To Next Page
Loading...
