The processor detects the voltage is lower
than you set at Lithium program. Please check
the cell count of the battery pack.
The processor detects the voltage is higher
than you set at Lithium program. Please check
the cell count of the battery pack.
The voltage of one of the cell in the Lithium
battery pack is too low. Please check the
voltage of the cell one by one.
The voltage of one of the cell in the Lithium
battery pack is too high. Please check the
voltage of the cell one by one.
There is bad connection at the individual
connector. Please check the connector and
cables carefully.
The internal temperature of the unit goes too
high. Cool down the unit.
The processor can not continue to control the
feeding current by any reason. The unit needs
to be repaired.
27
To Next Page
Loading...
