The ERC controller is preconfigured and allows the user to set the right temperature
for the product. It includes inner temperature sensor and also has sensors for the
refrigeration and lighting system that allow a better performance.
The LAE control is preconfigured, allowing user to select an adequate temperature
for different products. Alarms are shown on the display. It also includes an
automatic deicing mode, manual deicing, and lighting control.
IMPORTANT: if the unit has a temperature control issue or, if failure alarms occur
on CIF, EMS, LAE or ERC displays, never attempt to make control adjustments;
please call the Imbera USA Technical Services Department. You will be assisted
by experienced and authorized personnel.
The SCS control in some models is also preconfigured by the manufacturer to
maintain product temperature. It does not include a display that shows
temperature or alarms. If you notice malfunctioning, please notify the Imbera USA
Technical Services Department.
The ETC1H control in some models is also preconfigured by the manufacturer to
maintain product temperature. It does not include a display that shows
temperature or alarms. If you notice malfunctioning, please notify the Imbera USA
Technical Services Department.
17
CIF
The Intelligent Control Function is designed by Imbera to satisfy market cooling
needs, achieving maximum energy efficiency.
There are many CIF models to provide various solutions for multiple cooling needs
for each product.
To Next Page
Loading...