Cleaning the unit regularly prevents
deterioration and reduces
malfunctioning that may alter product
preservation.
Clean with a piece of cloth only, warm
water and neutral soap. Dry surfaces
using a soft cloth or rag.
Avoid cleaning surfaces with water hose
or jet wash.
Do not use solvent or abrasive products
for cleaning tasks as they may damage
surface finish.
Do not use sharp points to remove
excessive dirt; use brush if required.
Use a broom or mop to clean area under
unit. Avoid splattering water directly
under unit’s internal front area.
Do not use cleansers, detergents,
degreasers, sanitizers or bleaching
agents that contain chlorides or
phosphates on stainless steel.
Do not use sharp pointed objects to
remove excessive grime, use brush if
required.
IMPORTANT: disconnect the unit from wall outlet before you perform any
maintenance or cleaning task.
IMPORTANT: do not perform any cleaning task with water hose or jet wash as it may
cause damage to electrical components and cause electric shock.
It is preferable to perform cleaning and maintenance tasks using safety work
gloves.
With a moistened cloth, clean glass solid and glass door internal and external
surfaces at least once per week accordingly.
At least every three months, clean the door’s seal, check it for perfect condition, and
check whether it makes contact with frame inside cabinet.
With a moistened cloth, clean glass solid door internal and external surfaces at
least once per week.
At least once per month, clean sliding door rails and check for perfect conditions for
adequate door slide
5. GENERAL MAINTENANCE
5.1 GENERAL CLEANING
23
To Next Page
Loading...